3 8
Operation
Travis Industries
4 0 2 0 8 1 2
9 3 5 0 8 1 1 0
Starting the Fireplace for the First Time
!
Fingerprints or other marks left on the optional gold surface may become etched in place if they are not wiped
clean prior to turning the heater on. Clean gold with denatured alcohol and a soft cloth (make sure the fireplace is
cool). Other cleaners may leave a film that may become etched into the gold.
+
Burn the heater at a high setting with the blower off for an extended period (up to 48 hours). This will
cure the painted surfaces. Fumes from the paint curing and oil burning off the steel will occur. This is
normal. We recommend opening a window to vent the room.
+
Dust may accumulate inside the convection area of the heater when left idle. Once the heater is re-
started, a “smoky” smell may be created (similar to a baseboard heater when it is re-started).
+
Condensation may appear on the glass each time you start the fireplace - this is normal.
+
Blue Flames will occur on the fireplace when it first comes on. After fifteen minutes the flames will
turn a more realistic yellow and orange color.
?
Certain installations use a remote "wall switch" to turn the fireplace on and off. If this is the case, leave
the ON/OFF switch "ON".
Turning the Fireplace On and Off
OFF
ROOM TEMP
°F
°F
SET TEMPTIMER
MIN
Time
Set
Time
Cancel
A
u
t
o
OF
F
ON
Use this switch to
turn the main burner
on and off manually.
After the pilot has been started...
See the instructions included
with the remote for details on
operation.
For systems with wall
thermostats, use this switch to
control the temperature (right
is hotter, left cooler). Some
systems require the on/off
switch to be on.
See the instructions
included with the
remote for changing
the battery.
!
Do not place any combustible items on top of or directly in front of the fireplace, even temporarily. The
optional thermostat may start the fireplace causing a combustible item to ignite.
?
If the fireplace turns on and off frequently while using the thermostat, you may want to adjust the flame
height down until it produces just enough heat needed.
Adjusting the Flame Height
+
Your fireplace has an adjustable flame to tailor the look and heat output to your specific needs. It is
adjusted by turning the middle dial on the gas control valve.
Flame Height
Adjustment Knob
Index Mark
Turn clockwise to adjust the flame higher, counter-clockwise to lower.
PILOT ADJ
VENT
T
O
L
PI
ON
OFF
HI
LO
VENT
HI
LO
