Travis Industries 35 CB Australian, Руководство пользователя

Страница: 32 / 46

3 0
Operation
Travis Industries 9 3 5 0 8 1 3 4 4 0 3 0 6 2 4
Starting the Fireplace for the First Time
+ Burn the fireplace at a high setting for an extended period (up to 48 hours). This will cure the painted
surfaces. Fumes from the paint curing and oil burning off the steel will occur. This is normal. We
recommend opening a window to vent the room.
+ Dust may accumulate inside the convection area of the fireplace when left idle. Once the fireplace is
re-started, a “smoky” smell may be created (similar to a baseboard fireplace when it is re-started).
+ Condensation may appear on the glass each time you start the fireplace - this is normal.
+ Blue Flames will occur on the fireplace when it first comes on. After fifteen minutes the flames will
turn a more realistic yellow and orange color.
? Certain installations use a remote "wall switch" to turn the fireplace on and off. If this is the case, leave
the ON/OFF switch "ON".
Turning the Fireplace On and Off
OF
F
ON
Use this switch to
turn the main burner
on and off manually.
After the pilot has been started..
Se
inc
rem
the
! Do not place any combustible items on top of or directly in front of the fireplace, even temporarily.
Adjusting the Flame Height
+ Your fireplace has an adjustable flame to tailor the look and heat output to your specific needs. It is
adjusted by turning the middle dial on the gas control valve.
Flame Height
Adjustment Knob
Index Mark
Turn counter-clockwise to adjust the flame higher, clockwise to lower.