EN-16
Digital Camera >>
Charging the Battery
The state-of-charge of the battery will affect the performance of the digital still
camera. To maximize battery performance and lifetime, it is recommended that
you fully charge the battery using the AC adapter/charger and then fully
discharge it (through normal use) at least one time. Make sure that the power of
the digital still camera is off and then insert the battery before starting.
1. Insert the conversion adapter into the
conversion adapter terminal of the
camera as shown in the illustration.
2. Connect one end of the AC adapter/
charger to the DC IN terminal of the
conversion adapter.
3. C o n n e c t t h e o t h e r e n d o f t h e A C
adapter/charger to a wall outlet.
Charging time differs depending on
the ambient temperature and the
status of battery.
The digital still camera must be used with the specified AC adapter/
charger. Damage caused by the use of an incorrect adapter is not
covered under the warranty.
Always make sure that the digital still camera is off before removing the
battery.
The battery may feel warm after it has been charged or immediately after
being used. This is normal and not a malfunction.
When using the digital still camera in cold environments, keep the digital
still camera and its battery warm by holding it inside your jacket or other
warm protective environment.
