TransTel Communications TMS-Lite, Инструкция по установке и краткое справочное руководство

Страница: 18 / 20

Page 18
TMS Information
TMS-Lite systems are shipped ready for plug and play operation with the
TD-824i, using default extension numbering (11-34). In most circum-
stances, it will not be necessary to program much, if anything other than
script messages (answer greetings) and mailbox information for each sta-
tion.
The default script for the system is Script 00. Default programming re-
serves the numbers 1, 2 and 3 as the first digit of extension numbers.
Those three entries are not available for single digit menuing options.
The Digit 9 is reserved to allow callers to access their mailboxes remotely.
When calling in from the outside world.
Since this document is geared towards the Plug and Play package, it is
beyond the scope of this publication to explain methods for changing the
basic script options. For a complete explanation of the options available,
consult the TMS Lite Installation Manual, which is included in Adobe PDF
format on the CD-ROM that is included with each TMS Lite system.
To Record Script 00 (Main Answer Greeting)
In order to record the script, the caller must dial in from a telephone that
has auto-login disabled (Form 50-[station number]-05 set to a value of 1
(disabled). All stations in the TD-824i and TD-1648i ship with this option
enabled (set to 0), so for preliminary programming you should change this
parameter until such time as the customer’s greeting is recorded and ac-
cepted by the end user.
When you first access TMS-Lite, you will hear the message,
“This system has not been programmed”
This only means that the main greeting has not been recorded. It does not
mean that the default database is missing.
Enter the programming mode by dialing:
*900 + (password) Default password is 1234
The system voice will announce the firmware version and go silent.
Dial *100 00. You will hear a beep. You are recording.
When the message is finished, press the # key to end the message.
To listen to the recorded message, dial *101 00 and the system will play
back the message.
If you are satisfied with the message, you may dial *900 again to exit the
programming mode. If you wish to re-record the message, dial *100 00
again and record the message again.