TransTel Communications TMS-Lite, Инструкция по установке и краткое справочное руководство

Страница: 13 / 20

Page 13
Form 50-Station Number–05 Voice Mail Auto Logon Function
This controls whether the TD-824i will send an auto login code to the voice
mail system when a station user calls voice mail. If enabled, the station
user will be prompted for his password. If auto login is disabled, the station
user will hear the system main greeting (as if he had called in on a CO
trunk).
This is a class of service option and can be enabled and disabled for indi-
vidual stations.
Valid settings for this are:
0 = Enabled (system default) Sends Auto Login code
1 = Disabled - Does not send Auto Login code.
This option was added at the request of many dealers who installed sys-
tems where a live attendant answers most or all incoming calls and trans-
fers a large number of them directly to Voice Mail. By disabling the Auto
Login code, the attendant is played the default answer greeting and does
not have to “back out” of a login sequence. It is also handy in situations
where several people use the same telephone to access voice mail and an
automated login sequence is inappropriate.
Form 78-Extension Number – 04
Call Forward Busy To a Pre-assigned Hunt Group
This parameter is assigned to stations other than voice mail ports. It al-
lows Call forward Busy to the pre-assigned (voice mail) hunt group. This
allows stations to automatically have calls forward to voice mail when they
are using their phones, without the need for them to manually program call
forwarding on their telephones.
If a station user programs call forwarding to a location other than the as-
signed hunt group, the manual forwarding overrides this parameter. Upon
termination of manual call forwarding, this parameter once again controls
the destination of busy calls.
This is a class of service option and as such can be programmed for indi-
vidual stations.
Valid settings for this parameter are:
0 = Disabled. No system call forwarding is in effect.
1-9 = Forward to Hunt Group 1~9.
Note: If this parameter is enabled, Camp-On, Barge-In, Monitor, and
Off Hook Call Announce are not operational for the station