CAUTION
The most recent record (1) is shown first. Each new
measurement is assigned to the first (1) record. All other records
are pushed back one digit (e.g., 2 becomes 3, and so on), and
the last record (60) is dropped from the list.
If you want to check the other user’s
measurement records, please press “ ”
button to turn off the blood pressure monitor.
Then press and hold “ ” button to enter
the selecting user mode, press “ ” again
to change the user, when the desired user
ID blinks, press “ ” button to confirm.
Then press “ ” button to check the
records of the selected user.
3
.
1.
If you did not get the correct measurement, you can delete
all the results for the selected user by following steps.
(Take user 1 for example.)
In the memory mode, hold pressing
“ ” button about 3 seconds, the
flash display “dEL ALL” +User ID
will show.
2.
Press “ ” button to confirm
deleting , the LCD displays “ User
ID+dEL donE” and then turns off.
Note: To exit out of delete mode
without deleting any records, press
“ ” button before pressing “ ”
button to confirm any delete
commands.
If there is no record, when you
press “ ” button to check the
record, the right display will show.
3.
Delete the Records
19
18
DATA MANAGEMENT
DATA MANAGEMENT
