Setting Date, Time and Measurement Unit
It is important to set the clock before using your blood pressure
monitor, so that a time stamp can be assigned to each record that
is stored in the memory. (The setting range of the year :2000—2050,
time:24 H)
1
.When the monitor is off,
hold pressing “SET”
for 3 seconds to enter
the mode for year
setting.
2
.The [YEAR] blinks,
press the “MEM”
button to change
the numeral of
the year.
3
.When you get the
right year, press
“SET” to set down
and turn to next step.
The Choice of Power Supply
In order to get the best effect and protect your monitor,please use the right
battery and special power adapter which complies with CE safety standard.
•
.
Slide off the battery cover.
•
.
Install the batteries by matching
the correct polarity, as shown.
•
.
Replace the cover.
1
.Battery powered mode:
6VDC 4*AAA batteries
2
.AC adaptor powered mode:
6V 1A
(Please only use the recommended AC
adaptor model) (Not Included).
Please unplug the adaptor to depart from
the using utility power.
Installing and Replacing the Batteries
CAUTION
Remove batteries if the device is not likely to be used for some time.
The old batteries are harmful to the environment, do not dispose with other daily trash.
Remove the old batteries from the device and follow your local recycling guidelines.
CAUTION
Replace the batteries whenever the below happen
The shows
The display dims
The display does not light up
AC adaptor
Do not dispose of batteries in fire. Batteries may explode or leak.
START STOP
T
E
S
M
E
M
START STOP
T
E
S
M
E
M
START STOP
T
E
S
M
E
M
7
6
BEFORE YOU START
BEFORE YOU START
