7
© Transtector 2017. All Rights Reserved.
Installation Procedure
Product Warning Labels
Label indicates the potential hazards associated with installation and operation of unit.
DANGER!
RISK OF ELECTRIC SHOCK. SERVICE BY QUALIFIED TECHNICIAN ONLY.
WARNING!
VOLTAGE/CURRENT RATINGS. 230/240Vac; 2 WIRE + PE EACH PHASE; 60A MAX
EACH L-N.
Label indicates the potential increased temperature of the external surfaces of the chassis.
CAUTION!
CHASSIS MAY BE HOT.
Label indicates the need to disconnect all power supply source prior to servicing the unit.
WARNING!
DISCONNECT ALL SUPPLY SOURCES PRIOR TO SERVICE.
Label indicates LINE and
Label indicates test input terminals, voltage,
NEUTRAL connections, max
frequency, and maximum load current.
load current, voltage, and
frequency for permanent wire
connections.
Label
indicates
ground
connection
location.
Inspect Shipping Container
1. If damage is suspected, request that the carrier’s representative be present during unpacking. Note: Transtector is not liable for
damages incurred during shipping.
Inspect Contents of Container
2. During unpacking, inspect panel for damage. If damaged, contact the carrier. Report details of damage to Transtector by phone
at 1.800.882.9110 or 208.772.8515, or email us at [email protected].
3. Check contents of accessory kit, as listed in the table on page 8. If any items are missing, contact Transtector by phone at
1.800.882.9110 or 208.772.8515, or email us at [email protected].
4. If required, prior to fastening the 19 in. or 23 in. brackets to the panel, lightly coat the bracket’s contacting surface – between the
bracket and the panel – with an anti-oxidant.
5. Fasten 19 in. or 23 in. rack brackets to panel using supplied fasteners (eight, 10-32 flat head screws). (See “Bracket Installation”
on Page 9.) Torque fasteners to no greater than 23.7 inch pounds (~2.68 Newton meter). Note: Panel brackets provide near flush
front-face mounting or extended mounting up to 5 inch in 1 1/4 inch increments.
Model: AC240V60DF 6/6
P/N: 1101-1173