Transmitter Solutions iCE?Entry?100, Руководство по установке

Страница: 48 / 52

ICE-­‐ENTRY-­‐100
INSTALLATION MANUAL
Page 47
ICE-ENTRY-100 PROGRAMMING TABLE
Name Default Value Short Description
LNG 0 Language selection
LOT 90 Connection time out value
LOGN 5 Number of log events for printing out
LOGI 0 Log interface
ALC 1 Automatic log clear
ADF 90 Auto dial functionality ( Call TN1 )
ARST 0 Automatic reset timeout
CREF “EUR” Parse text( contact support )
CTIM “EURO” Parse text( contact support )
CVODA “DISPON. E.” Parse text( contact support )
OP1 1 Output invert 1
OP2 1 Output invert 2
BUZ 1 Buzzer control
SPO 1 SIM card starting position
CLPEN 1 Enable CLIP functionality
CLPOU 1 Control output pin when CLIP event
CLPI 0 CLIP input activation condition
CLP1 Empty CLIP number 1
. .
. .
. .
CLP20 Empty CLIP number 20
KPA1 Empty Call group 1, Telephone number 1.
KPB1 Empty Call group 1, Telephone number 2.
KPN1 1 Call group 1, keypad dial number .
KPT1 25
Call group 1, time out control for voice
connection.
KPO1 1 Call group 1, output .
. .
. .
. .
KPA100 Empty Call group 100, Telephone number 1.
KPB100 Empty Call group 100, Telephone number 2.
KPN100 100 Call group 100, keypad dial number .
KPT100 25
Call group 100, time out control for voice
connection.
KPO100 1 Call group 100, output .
TBE 0 Trade button enable/disable.
TBZS 0 Trade button zone interval start.
TBZE 0 Trade button zone interval end.
Table 28: ICE-ENTRY-100 default settings.