Transmitter Solutions iCE?Entry?100, Руководство по установке

Страница: 19 / 52

ICE-­‐ENTRY-­‐100
INSTALLATION MANUAL
Page 18
9.1.3 CONTROLING OUTPUTS WITH DTMF
ICE-ENTRY-100 can control the outputs with the use of DTMF. This is very useful
function in the intercom application.
To control the outputs the user must press the combination of 2 digits. First digit
is used to select the output (1 to 2), the second digit is used to activate (1) or
deactivate (0) the output. There is a special case when the user can select for
first digit (output selection) number 0. In this case all outputs control by the same
time.
Combination must be pressed in 2s interval, and must be 3s apart to be valid.
NOTE
ICE-ENTRY-100 must be in voice connection to support DTMF output
control!
Example:
DTMF combination Description
00 Deactivate ALL outputs
01 Activate ALL outputs
11 Activate output 1
20 Deactivate output 2
Table 5: DTMF control example
9.2 OUTPUT MANAGEMENT
ICE-ENTRY-100 supports the possibility to report alarms from inputs and any other
events locally via 4 outputs. The behavior is defined using next parameters
9.2.1 OS parameter
ICE-ENTRY-100 device has 2 dedicated relay supported outputs. Outputs can be
configured to different behavior:
⇒
OS = 0 – Disabled
⇒
OS = 1 – Bi-stable toggle mode
⇒
OS = xxx – Mono-stable pulse mode ( duration in seconds )