Transmitter Solutions iCE?Entry?100, Руководство по установке

Страница: 20 / 52

ICE-­‐ENTRY-­‐100
INSTALLATION MANUAL
Page 19
Typical connection for the output:
Figure 3: Output Connection diagram
9.2.2 OD parameter
OD parameter is used to link the alarm event directly to output.
9.2.3 OP1, OP2 parameters
Parameters are used to invert the polarity of the outputs.
⇒
0 – normal
⇒
1 – inverted
9.2.4 Table of parameters
Name Comment
OS1 Mode of operation for output 1
OS2 Mode of operation for output 2
OD1 Input 1 direct link to outputs
OD2 Input 2 direct link to outputs
OD3 NAC direct link to outputs
OP1 Invert control for output 1
OP2 Invert control for output 2
Table 6: Output management parameters
Example:
♦
Direct programming on the SIM card