Transmitter Solutions DOLCSAW10KH, Быстрое справочное руководство по программированию

Страница: 9 / 12

To Unlock the door
To Unlock the door
Read User card
(Note that Manager Card can t be used as User Card
to unlock the door.)
10. Advanced Application
10.1 DOLCSAW10KH operating as a Controller
In this mode the
DOLCSAW10KH
supports a Wiegand 26 bit input so an external Wiegand device
with a 26 bit output can be connected to the Wiegand input terminals on the
DOLCSAW10KH.
Either an ID card reader (125 KHZ) or an IC card reader (13.56 MHZ) can be connected to the
DOLCSAW10KH Cards are required to be added at the external reader, except where an external
ID reader is used, in this case cards can be added at either reader or controller. See figure 1
Figure 1
10.2 DOLCSAW10KH operating as a Wiegand Output Reader
In this mode the
DOLCSAW10KH
supports a Wiegand 26 bit output so the Wiegand data
lines can be connected to any controller which supports a Wiegand 26 bit input. See figure 2
Green
GND
Em card
Ic card
HID card
+12V
D1
D0
reader plug
DOLCSAW10KH Controller
J1
Power
DC12V/3A
Alarm
Wiegand reader
Lock
White
Grey
Yellow
Brown
Red
Black
Blue
Purple
Orange
D0
door detecting switch
exit btn
D1
ALARM-
OPEN
D_IN
+12V
GND
VSS
L-
L+
ALARM+
9