Transmitter Solutions DOLCSAW10KH, Быстрое справочное руководство по программированию

Страница: 3 / 12

2. Description
The DOLCSAW10KH is fully waterproof stand alone Proximity access Reader, which uses an
advanced micro processor, equipped with large capacity Flash memory, it supports up to
10,000 cards. It can read both 125 KHz HID card and 125 KHz EM card. It is easy to add or
delete card users by using the master card; as well as, with the
infrared remote control
programmer.
The DOLCSAW10KH not only has the features of low power consumption, automatic selection of
lock , anti vandal alarm and exit button, but also has protective function against input over
voltage and output short -circuit. The block enrollment function allows you to enroll a
maximum 10,000pcs HID cards or EM cards at a time within 10 minutes. These features
make the DOLCSAW10KH easy in operation, safe and reliable; it is an ideal choice for door
access.
3. Features
Standalone Card Reader
Waterproof, confirm to IP68
Use capacity: 10,000
Card interface: HID&EM 125KHZ card/tag
Remote control for programming
Manager cards for fast add and delete users
Card block enrollment
Can enroll a maximum of 10,000 cards at a time within 10 minutes
Wiegand26 input/output
Can be used as a slave reader
2 pcs DOLCSAW10KHW can be interconnected
Can be used as controller by connecting wiegand reader
Anti-Pass back Function
Alarm signal output, Door open detection
LED display; Full of 10000 users, recognizing speed <15ms.
3