Transmitter Solutions DOLCSAW10KH, Быстрое справочное руководство по программированию

Страница: 7 / 12

7
9. DOLCSAW10KH Detailed Programming Guide (continued)
To add a card user (Method 1)
This is the faster way to enter cards using ID
number auto generation. The card can be
either be presented or input the 8 digit card
number from the card can be manually
entered
or
1 Read Card #
1 Input Card number (8 digit) #
Card can be added continuously without exiting
programming mode.
The card number is the last 8 digits of the number
printed on the card.
To add a card user (Method 2)
This is the alternative way to enter cards
using User ID Allocation. In this method a
User ID is allocated to a card. Only one user
ID can be allocated to a single card.
1 ID number # Read Card # or
1 ID number # the Card number (8 digits) #
To add a series of card users – Block
Enrollment
(It can enroll maximum 10,000pcs cards at a
time within 10 minutes.)
8 8 digits Card number # Card
quantity #
Card quantity is between 1-10,000. Of the 8 digits
card number, for HID card, they are the 3 digits of
a facility code and 5 digits of a serial number; for
EM card, they are the last 8 digits on the card.
To delete a card user.
Note users can be deleted continuously
without exiting programming mode
2 Read Card # or
2 Card number #
To delete ALL users.
(Note: This option will delete all users but
Manager Cards. Be careful with use)
2 0000 #
9.2 Door setting
Lock power setting
Fail secure (Unlocked when power on)
This is the factory default, 3 seconds
4 0 99 #
0-99 is to set the door relay time 0 99 seconds.
Fail safe (unlocked when power is off)
5 0 99 #
0 99 is to set the door relay time 0 99 seconds.
Enter programming mode
Enter programming mode
Enter programming mode
Enter programming mode
Enter programming mode
Enter programming mode
Enter programming mode