background image

C/E-PSW-FX-03 IN THE NETWORK

The TRANSITION Networks C/E-PSW-FX-03 series two-port bridging
media converter is intended to be installed, singly or in pairs, to provide
network distance extension, network congestion reduction, and/or rate
conversion between legacy Ethernet

and Fast Ethernet devices.

TECHNICAL SPECIFICATIONS

Standards

IEEE 802.3

Case Dimensions

4.75" x 3.0" x 1.0"

(119mm x 76mm x 25mm)

Shipping Weight

2 pounds

(0.9 kilograms)

Environment

Temperature:

0-50°C (32° to 122° F )

Storage Temperature:  -20 to 85°C

Humidity

10-90%, non condensing 

Altitude

0-10,000 feet

Warranty

Lifetime

DECLARATION OF CONFORMITY

Name of Mfg:

Transition Networks 
6475 City West Parkway, Minneapolis MN 55344 USA

Model:

C/E-PSW-FX-03 Series Bridging Media Converter 

Part Number:

C/E-PSW-FX-03, C/E-PSW-FX-03(SC), C/E-PSW-FX-03(SM),
C/E-PSW-FX-03(LH), C/E-PSW-FX-03(LW), C/E-PSW-FX-03(XL)

Regulation:

EMC Directive 89/336/EEC

Purpose:  To declare that the E-PSW-FX-03 to which this declaration refers is in

conformity with the following standards.

EMC-CISPR 22: 1985 Class A;  EN 55022: 1988 Class A;  EN 50082-1:1992;
EN 60950 A4:1997;  IEC 801.2, IEC 801.3, and IEC 801.4;  IEC 950

I, the undersigned, hereby declare that the equipment specified above conforms to the

above Directive(s) and Standard(s).

_September 10, 2000_____

Stephen Anderson, Vice-President of Engineering

Date

Link

UTP/STP

Fiber

Link

FDX

Power

100

Link

UTP/STP

Fiber

Link

FDX

Power

100

10BASE-T Cable

100BASE-TX Cable

1

00

BA

SE-FX

Ca

ble

Содержание C/E-PSW-FX-03










Отзывы: