TransCore MPRX, Системное руководство

Страница: 20 / 208

System Guide
TransCore Proprietary 1–2
Chapter 1 Introduction
This chapter presents an overview of the MPRX System Guide.
Table 1 – 1
describes the contents of each chapter.
Table 1 – 1 MPRX System Guide Overview
Chapter Number
and Title
Description
Chapter 1 – Introduction Outlines the manual’s organization, provides a brief description of the
MPRX, and discusses Federal Communications Commission (FCC) licensing
requirements.
Chapter 2 – Developing
the Site Plan Discusses factors to be considered when developing the site plan and before
ordering equipment and installing the MPRX. These considerations include
antenna and tag alignment, site layout and traffic flow, and electrical and
communications requirements.
Chapter 3 – Choosing,
Installing, and Removing
Tags Contains information on compatible tag models and provides procedures
for installing tags onto, and removing tags from, railcars where the MPRX is
installed.
Chapter 4 – Installing
the Multiprotocol Reader
Extreme Lists the materials needed and provides procedures to install the MPRX,
including pre-installation testing, installing the MPRX in a railside hut or NEMA
enclosure, connecting power and communications, connecting to TransCore’s
Train Recording Unit (TRU™), and marking the read zone
Chapter 5 – General
Software Information Provide reference information on various software-related topics
Chapter 6 –
Communications
Protocols Provide reference information on various communications protocols.
Chapter 7 – Commands Discusses the host-transmitted commands that are used to control MPRX
configuration and operation.
Chapter 8 – Configuring
the Multiprotocol Reader
Extreme Provides procedures for configuring and fine-tuning the MPRX after installing
it at the site, including marking the read zone.
Chapter 9 –
Troubleshooting and
Maintenance Answers the most commonly asked questions about installing and maintaining
the MPRX.
Chapter 10 –Interface to
Train Recording Unit Describes the interoperability between the MPRX and the TRU.
Chapter 11 – Connecting
AT5720 Check Tag-to-
MPRX Assembly Explains how to connect one or two check tags to the MPRX.