Accumulator Function Operation
The EL-3000 comes equipped with a handy accumulator function which works in conjunction with all of
the scale's displayable units except Unit Weight. The accumulator uses a memory to store the weight
readings and piece counts. Much like a pocket calculator, this memory can be added to, displayed, and
cleared at any time.
When used with a printer, the EL-3000 prints the weight each time the
M+
key is pressed and prints
the accumulated total when the
MR
key is pressed. See Multi-Item Print on Page 8 for more
information.
To use the accumulator function:
1. Use
the
MODE
key to toggle to the desired unit you wish to count.
2. If the "MEM" indication is lit, press and hold the
ZERO/CLEAR
key to clear the accumulator
memory. The scale briefly displays "CL" to indicate that memory has been cleared.
3. Place the objects to count on the platform.
4. After the "STABLE" indication becomes lit,
press the
M+
key to add this value to the
accumulator's memory. The scale reading
flashes once and the "MEM" indication
becomes lit to show that there is a value in
memory.
G
oz
T
N
lb
pcs
%
OK
HI
LO
O
E
Mem
MR
Unit Wt.
kg
5. Repeat steps 3 & 4 until all pieces are counted.
6. Press the
MR
key to briefly view the
contents of the accumulator. The "MR"
indication turns on to indicate that the
reading is from memory.
G
oz
T
N
lb
pcs
%
OK
HI
LO
O
E
Mem
MR
Unit Wt.
kg
EL 3000 Operating Manual
5
