Transas T214, Техническое руководство

Страница: 114 / 115

Troubleshooting
TRANSAS AIS BASE STATION T214. Technical Manual.
112
№ Fault manifestation Group Probable
cause
Cure
1 As the main unit is connected to the
power supply, the LED does not light
up, the Service Display displays the
”No link with the main unit” message’,
there are no other messages. 1 No external
power supply
or the fuse
burned Check and connect to
the external power
supply and/or replace
the fuse.
2 Same as in item 1 but the Power ON
LED is lighted. Judging by the
external equipment diagnostics (e.g.,
NAVI-HARBOUR, ECDIS), the main
unit does not function. 1 Main unit
power supply
burned off
а
Contact the service
centre.
3 With the power up. the Service
Display displays one of the following
messages:
“ROM: Error”;
“RAM: Error”;
“Flash: Error”.
2 Central
processor
assembly
failure Contact the service
centre.
4 In the course of operation, the Service
Display displays the “Fatal
error:”
message followed by the diagnostics
message text.
2 Failure of
one of the
main unit
assemblies Contact the service
centre.
Connection
cable broken Restore the cable if the
appropriate tools and
materials are available. 8 The Service Display displays a ”No
link with the main unit” message, but
judging by the external equipment
diagnostics (e.g., NAVI-HARBOUR,
ECDIS), AIS Base Station
Т 214
equipment operates normally.
5
Service
Display or
main unit
port burned
off Contact the service
centre.
Incorrect
interface
setup. Check if the interface
setup is correct in the
setup menu.
If the setup is
correct, the
connection
cable may be
broken. Restore the cable if the
appropriate tools and
materials are available.
9 One or several external devices
connected to the main unit does not
interact correctly with AIS Base
Station
Т 214.
4
Serial port
burned off. Contact the service
centre.