Trane VariTrac VAV-SVN03A-EN, Руководство по установке

Страница: 22 / 71

VAV-SVN03A-EN 16
Secure Termination Module to Conduit Box
1 Remove the screws from the conduit box.
2 Line up the conduit box screw holes on the termination module (Figure 3)
with the screw holes on the conduit box.
3 Install the screws.
NOTE: When mounting the termination module to a 4 in. x 4 in. conduit box,
remove the plastic cover over the box for easier access. Do not attempt to break
away excess plastic. Use a hack saw blade and carefully cut away the plastic.
Install VariTrac CCP Relay Board
1 Separate the main module and front panel from the termination module.
2 Remove the relay board from its packaging.
3 Orient the relay board so that its 20-pin socket connector faces left (see
Figure 5).
4 Slide the left edge of the board underneath the catches on the left side.
5 Rotate the board to the catches on the right side.
6 Snap the board into place by pressing on the terminal block or on the
right side of the board.
Figure 5: Installing Optional Relay Board
Getting Started