Trane TZEMT400, Руководство по установке

Страница: 20 / 32

20
Set Clock
The Set Clock screen allows you to set the thermostat’s internal clock.
Î
Î
If the clock has been reset by an extended power outage, the clock
display on the thermostat screen will blink. Press the
MENU button to
go directly to the
SetÎClock screen.
Set the Clock
1. Press the
MENU button.
2. Scroll to
UserÎSettings and press the Select button.
3. Scroll to SetÎClock and press the Select button.
4. Scroll to the item you want to change (hour, minute, day part, month,
day, year, day of week).
5. Press the plus (
+) or minus (-) buttons to adjust the item.
6. Press the
Set button to save the changes.
Filter Service
The Filter Service screen will show the accumulated Filter Runtime hours as
well as the Service Interval that will be used to trigger a Filter Message. Any
type of HVAC operation that causes the HVAC system fan to run will cause
the Filter Runtime value to increase.
When the Runtime hours equals the Service Interval hours, the Red LED
will flash along with a “Filter” message to remind you to replace the filter.
Once the filter has been replaced, press the Reset button to reset the Filter
Runtime value to zero.
View/Reset Filter Runtime
1. Press the MENU button.
2. Scroll to UserÎSettings and press the Select button.
3. Scroll to
FilterÎService and press the Select button. The Filter Runtime
is displayed in hours.
4. To reset the Filter Runtime counter, press the Reset button.
Î
Î
The Filter Runtime counter should be reset each time the filter is changed.
Change the Filter Service Interval
1. Press the MENU button.
2. Scroll to
UserÎSettings and press the Select button.
3. Scroll to
FilterÎService and press the Select button.
4. Press the plus ( +) or minus (-) buttons to adjust the service interval.
Î
Î
The service interval can be set between 100 and 4000 hours in 100 hour increments.
Disable the Filter Service Interval
When the filter service interval is disabled, the runtime counter will continue to count the runtime, but the filter service indicator will never be
displayed.
1. Press the
MENU button.
2. Scroll to
UserÎSettings and press the Select button.
3. Scroll to FilterÎService and press the Select button.
4. Press the minus ( -) button until Disabled is displayed
Set Clock
Back Set
Time 11 : 15 AM
Date 01 / 01 / 09
Day Thu
+
-
Filter Service
Done Reset
Filter Runtime 184 HRS
Service Interval 300 HRS
+ -
User Settings