Trane Picco R32-140 Скачать руководство пользователя страница 34

Страница: 34 / 44

Picco R32

Inverter air/water heat pumps with axial fan

12. TECHNICAL DATA

12.1

TECHNICAL SHEET HEAT PUMP

Performance referring to the following conditions,according to standard 14511:2018:

(1) Cooling: outdoor air temperature 35°C; in/out water temperature 12/7°C.

(2) Cooling: outdoor air temperature 35°C; in/out water temperature. 23/18°C.

(3) Heating: outdoor air temperature 7°C b.s. 6°C b.u.; in/out water temperature 30/35°C.

(4) Heating: outdoor air temperature 7°C b.s. 6°C b.u.; in/out water temperature 40/45°C.

(5) Cooling: in/out water temperature 7/12°C.

(6) Heating: Average climatic conditions; Tbiv=-7°C; low temperature.

(7) Figures are approximate and subject to change. Always refer to the technical label on the unit for the correct figure.

(8) The volume indicated refers to the total required, the designer must meet it considering the quantity already present inside the unit depend-

ing on the hydronic kit chosen (please check this value in the data sheet).

(9) Sound power: condition (3); value determined on the basis of measurements made in accordance with UNI EN ISO 9614-2, in compilance with

the requirements of Eurovent certification.

(12) Heating: outdoor air temperature 7°C b.s. 6°C b.u.; in/out water temperature 47/55°C.

(**) for PS/PSI pump kit

N.B. Performance data are indicative and are subject to change. Furthermore the performance declared in points (1), (2), (3), and (4) is in

tended to refer to instantaneous power according to UNI EN 14511. The value declared in point (5) and (6) is determined according to UNI

EN 14825.

Содержание Picco R32-140













































Результаты поиска

Содержание Picco R32-140

Отзывы:

Похожие инструкции для Picco R32-140

Бренды по названию

Популярные бренды

Trane Picco R32-140, Руководство пользователя и инсталлятора

Результаты поиска

Содержание Picco R32-140

Отзывы:

Похожие инструкции для Picco R32-140

Бренды по названию

Популярные бренды