INSTRUCTION MANUAL
UG30 CONTROL
mP30-UG30 - Rev. 1.5 - Date: 18-03-2004
EN
31 (44)
REMOTE CONTROL OF UNIT
The unit can be started and stopped
alternatively
by :
1.
a remote contact (or “remote control”);
2.
a “supervision system” connected to the microprocessor by a serial cable.
ON/OFF FROM REMOTE CONTACT:
the unit is started via the
ID1
digital input. When the input is open, the unit is
on stand-by signalled by the “OFF” symbol on the display. If, instead, 24V is supplied, the unit is powered up
(signalled by the “ON” symbol on the display).
GLb
G
ENERAL
Minimum Maximum
Default
HE
ON/OFF digital input: enables the ID1 digital input as a remote ON/OFF.
0= absent
1= present, disables ON/OFF switching from the keyboard.
2= absent, disables ON/OFF switching from the keyboard (only in the case
of supervision systems)
0 2 0
SUPERVISION SYSTEM
A supervision system exchanges data via serial cable with the unit’s basic circuit which is remotely commanded and
controlled: to this end, the
RS485 Serial Circuit
(optional) must be present.
GLb
G
ENERAL
Minimum Maximum
Default
Ho
Serial address in the RS485 supervision network.
1
200
1
HP
Supervisor serial Baudrate. It sets the line speed on the RS485 supervision
network.
1= 1200 Baud
2= 2400 Baud
3= 4800 Baud
4= 9600 Baud
5= 19200 Baud
1 5 5
