33
DECLARATION
Les parties/paragraphes suivants des normes harmonisées ont été appliquées. / The following parts/clauses of harmonized
standards have been applied. / Folgende harmonisierten Normen oder Teile / Klauseln hieraus zur Anwendung gelangten. /
Части
следните
хармонизирани
стандарти
са
приложени
. / byly použity následující
č
ásti/ustanovení harmonizovaných
technických norem / Eventuelt henvisning til de harmoniserede standarder /
όροι
των
εναρμονισμένων
με
την
οδηγία
κανονισμών
έχουν
εφαρμοσθεί
. / Las siguientes normas armonizades, o partes de ellas, fueron aplicadas. / Parts / järgmiste ühtlustatud
standardite kohaldamist. / Seuraavia yhdenmukaistettuja standardeja tai niiden osia/kohti) on sovellettu. / Dijelovi / slijede
ć
i
harmoniziranih standarda su primijenjene. / Alkatrészek követ
ő
en harmonizált szabványokat alkalmazták. / Sono state applicate
le seguenti parti/clausole di norme armonizzate./ Dalys / šie darnieji standartai nebuvo taikomi. / Parts / š
ā
di saska
ņ
oti standarti
tika piem
ē
rots. / Partijiet li
ġ
ejjin
ġ
ew applikati standards armonizzati. / De volgende onderdelen van geharmoniseerde normen
zijn toegepast / Folgende deler/punkter i harmoniserte standarder har vært anvendt./ Cz
ęś
ci / nast
ę
puj
ą
ce zharmonizowane
normy zosta
ł
y zastosowane. / Foram observadas as/os seguintes partes/parágrafos das normas harmonizadas : /Piese
urm
ă
toare s-au aplicat standardele armonizate /
Были
применены
следующие
части
/
положения
согласованных
стандартов
./ Parts nasledujúce harmonizované normy neboli použité. / Deli po usklajenih standardih, so bili uporabljeni. /Att
följande harmoniserande standarder eller delar därav har tillämpats. / A
ş
a
ğ
ı
daki standartlar uygulanm
ı
ş
t
ı
r. /
Частини
наступні
узгоджені
стандарти
застосовувалися
:
EN 349:1993+A1:2008 Safety of machinery -
Minimum gaps to avoid crushing of parts of the human body
EN ISO 12100:2010 Safety of machinery -
General principles for design - Risk assessment and risk reduction
EN ISO 13857:2008 Safety of machinery -
Safety distances to prevent hazard zones being reached by upper and lower limbs
EN 60034-1:2010 Rotating electrical machines -
Part 1: Rating and performance.
EN 60034-7:1993 Rotating electrical machines -
Part 7: Classification of types of construction, mounting arrangements and
terminal box position.
EN 60204-1:2006 Safety of machinery -
Electrical equipment of machines - Part 1: General requirements.
EN 61000-6-1:2007 Electromagnetic compatibility (EMC) -
Part 6-1: Generic standards - Immunity for residential, commercial
and light-industrial environments
EN 61000-6-3:2007/A1:2011 Electromagnetic compatibility (EMC) -
Part 6-3: Generic standards - Emission standard for
residential, commercial and light-industrial environments
ISO 1496-2 1996 Series 1 freight container:
specification and testing: thermal container
EN 378-1:2008 Refrigerating systems and heat pumps - S
afety and environmental requirements - Part 1: Basic requirements,
definitions, classification and selection criteria .
EN 12830:1999
Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen
food and ice cream. Tests, performance, suitability.
NF EN 13485 2001
Thermometers for measuring the air and product temperature for the transport, storage and distribution of
chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability.
NF EN 13486 2001
Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen,
deep-frozen/quick-frozen food and ice cream - Periodic verification
Содержание MP-4000
