Trane MP-4000 Скачать руководство пользователя

Страница: 27 / 40

NAVIGATING THE CONTROLLER OPERATING MENU

PTI

Turn the

NIT

. Allow

Unit to start and stabilise.
Complete the following

steps:

1.Press the

PTI

Special

Function key.

2. Press the F2/F3 keys to scroll down to select

from the different PTI test.

3. Press the F4 key to ACCEPT and start the

PTI or test.

VIEWING ALARMS/
WARNINGS

To view the alarms that are

present, turn the

NIT

.Allow Unit to start and

stabilise.
Complete the following

steps:

1. Press the

LARM

. The Alarm List

appears.

2. Press the

F2/F3

keys to scroll between

Alarms that are present.

3. Press the

key to acknowledge the Alarm.

Press F1 again to exit.

DISPLAY
ALTERNATE
FAHRENHEIT (F)
OR CELSIUS (C)
TEMPERATURES

To view the alarms that are present, turn the

NIT

.Allow Unit to start and stabilise.

Complete the following step:
The controller can display temperatures in

Celsius or Fahrenheit. Press the

function

key display will change to C or F
To change the display to C or F permanently,
press and hold the F2 C/F key, then confirm

“ARE YOU SURE YES or NO. Some

customers do notallow the display to be change

permanently.

CHANGING
SETPOINT

To change the controller

setpoint, turn the

NIT

.Allow Unit to start and

stabilise.
Complete the following

steps:
1.Press the

key at the

main screen. The Setpoint Change menu

appears.

2. Press the

F2/F3

keys to scroll the Setpoint

Up or down - depending on your required

Temperature.

3. Press and hold the

key until you are

returned to the main Screen. The new

setpoint is recorded in the controller and

appears in the display.

CONTROLLER BACK-UP BATTERY

Every Controller has a Back-up Battery. This

will allow the controller to be energized if the

unit is not connected to shore power. The

technician can change settings in the controller

- Setpoint, etc.
Press the ON/OFF key, the controller will

energize and stay energized for 25 sec, by

pressing any of the Menu keys the 25 sec timer

will reset to 20 sec.

Содержание MP-4000









































Результаты поиска

Содержание MP-4000

Отзывы:

Похожие инструкции для MP-4000

Бренды по названию

Популярные бренды

Trane MP-4000, Руководство оператора

Результаты поиска

Содержание MP-4000

Отзывы:

Похожие инструкции для MP-4000

Бренды по названию

Популярные бренды