Trane MCD 048 Скачать руководство пользователя страница 28

Safety recommendations

To avoid accidents and damage, the
following recommendations should
be observed during maintenance
and service visits :
1. Never apply pressure higher than

7 bar for tests.

2. Disconnect the main supply

before any servicing on the unit.

3. Service work on the refrigeration

system and the electrical system
should be carried out only by
qualified and experienced
personnel.

Maintenance contract

It is strongly recommended that you
sign a maintenance contract with
your local Service Agency. This
contract provides regular
maintenance of your installation by
a specialist in our equipment.
Regular maintenance ensures that
any malfunction is detected and
corrected in good time and
minimizes the possibility that
serious damage will occur. Finally,
regular maintenance ensures the
maximum operating life of your
equipment. We would remind you
that failure to respect these
installation and maintenance
instructions may result in immediate
cancellation of the warranty.

Training

The equipment described in this
manual is the result of many years
of research and continuous
development. To assist you in
obtaining the best use of it, and
maintaining it in perfect operating
condition over a long period of time,
the constructor has at your disposal
a refrigeration and air conditioning
service school. The principal aim of
this is to give operators and
maintenance technicians a better
knowledge of the equipment they
are using, or that is under their
charge. Emphasis is particularly
given to the importance of periodic
checks on the unit operating
parameters as well as on preventive
maintenance, which reduces the cost
of owning the unit by avoiding
serious and costly breakdown.

Trane has a policy of continuous product and product data improvement and reserves the right to
change design and specifications without notice.
Only qualified technicians should perform the installation and servicing of equipment referred to in
this publication..

Literature Order Number

SS-SVX07B-E4

Date

0808

Supersedes

SS-SVX07A-E4_0606

Stocking Location

Europe

www.trane.com

For more information contact your local 
district office or e-mail us at [email protected]

Trane bvba 
Chaussée de Wavre 1789 - 1160 Brussels, Belgium 
ON 0888.048.262 - RPR BRUSSELS

Содержание MCD 048





























Отзывы: