Trainsway ZH825B, Инструкция по установке и эксплуатации

Страница: 32 / 64

31
Figure 1.
6. Turn the wheel anticlockwise slowly and the indicators 2 and 4 will illuminate. Once an
indicator is fully illuminated, lead can be placed on the rim alongside the illuminated
indicator, in this case indicator 3 (inside of the rim). The lead should be posted on the inside
of the rim at 12 o’clock on the upper side the rim. See figure 2:
Figure 2.
7. After you finished installing the wheel weights, you need to close the safety guard so that the
rotation starts again, if both display 1 and 3 show 0, it means the balancing has succeeded.
Press the button [FINE] to check the balance value precisely.
8. In case there is still an unbalance, repeat steps 5 to 7 as described above.