Towbar Fitting Instructions
To Suit
MAZDA CX-8 CL4
Part Number
QTMA662L
Rating
2000
/
100
kg
PLACE THESE INSTRUCTIONS IN THE VEHICLE’S GLOVEBOX AFTER INSTALLATION IS COMPLETED
Cequent Customer Service
Ph
:
1800 812 017 Fax
:
03 9898 3299
:
info@cequent
.
com
.
au
Post
:
PO Box 4050, Dandenong South VIC 3175
Rev
:
A Page 5 Issue Date
:
14-02-2019
13. On chassis rail peel off the tape to reveal
the 2 x mounting positions.
14. Unclip the wiring harness from the
chassis rail.
Repeat for other side.
15. Loosely secure side arm to the chassis
rail with 2 x M12 bolts complete with 1 x
washer per bolt.
16. Cable tie (not provided) the unclipped
harness to small hole on the side arm.
Repeat for other side.
17. Fit the back plates to the impact beam
mounting studs and secure with the 4 x
retained nuts per side.
Torque the impact beam nuts to 40Nm
.
