Towbar Fitting Instructions
To Suit
MAZDA CX-8 CL4
Part Number
QTMA662L
Rating
2000
/
100
kg
PLACE THESE INSTRUCTIONS IN THE VEHICLE’S GLOVEBOX AFTER INSTALLATION IS COMPLETED
Cequent Customer Service
Ph
:
1800 812 017 Fax
:
03 9898 3299
:
info@cequent
.
com
.
au
Post
:
PO Box 4050, Dandenong South VIC 3175
Rev
:
A Page 6 Issue Date
:
14-02-2019
18. Lift the crosstube to the side arms and
loosely secure to the side arms with 3 x
M12 Bolts complete with 2 x washers
and 1 x nut per bolt for each side.
Torque all M12 fasteners to 125Nm.
19. For the bumper cut.
Locate the centre of the bumper, and on
the outside, mark off and cut out 90mm
wide by 120mm long measured from the
bottom edge of the bumper.
(Cut should
stop about 15mm below the bottom
styleline)
Deburr and smooth off cut edges.
20. Determine an appropriate position for the
plug bracket. Mark out and drill 2x
ø5mm holes 69mm apart on bumper skin
to support plug bracket.
21. Reattach bumper and removed
components by following steps 1-10 in
reverse.
90mm
120mm
