TRADEDOR TD55DM, Руководство по установке, Страница: 24 / 40

Tradedor TD55DM & TD55SEL Installation Guide
A
Independent Button
Operation
1 Press and hold the “RADIO PROG” button
(fig.12.1) . You will hear 3 beeps and the red LED
alongside “C3” will illuminate.
2 Press top button on handset (fig.12.2A) .
The panel will beep to confirm it has accepted.
Repeat for all other handsets.
3 Leave for several seconds and the receiver box
will beep twice to confirm end of programming.
4 Press and hold the “RADIO PROG” button (fig.10.1) .
You will hear 4 beeps and the red LED alongside
“C4” will illuminate.
5 Press bottom button on handset (fig.12.2B) .
The panel will beep to confirm it has accepted.
Repeat for all other handsets.
6 Leave for several seconds and the receiver box
will beep twice to confirm end of programming.
fig.12.2
B
23
fig.12.1
Sequential Operation
1 Press and hold the “RADIO PROG” button
(fig. 12.1) . You will hear a beep and the red LED
alongside “C1” will illuminated. Then release the
“RADIO PROG” button.
2 Press top button on handset (fig.12.2A) .
The panel will beep to confirm it has accepted.
Repeat for all other handsets.
3 Leave for several seconds and the receiver box
will beep twice to confirm end of programming.
12. Programming Of Remote
Control Handsets And Push
Button
(SAFETY EDGE)
- TYPE 1