TracVision C3, Руководство по установке

Страница: 15 / 24

16
Follow the steps below to mount the switchplate.
a. Fit the switchplate flush into the panel cutout
you made in “Cut Out the Switchplate Hole”
on page 9 .
b. Drill out four 5/32" (4 mm) mounting holes
in the switchplate’s screw cavities (see
Figure 26).
c. Mount the switchplate to the mounting
surface using four #6 screws.
d. Gently snap the switchplate cover onto the
front of the switchplate to conceal the
mounting screws.
e. Circular only:
Skip to “Set Up and Test the System” on
page 20 .
Figure 26: Switchplate Mounting
5/32" ( 4 mm)
Mounting Hole (x4)
#6 Screw (x4)
Front C
over
Switch
plate
Moun
ting Surf
ace
Mount the Switchplate 13