TracVision A5, Руководство по установке

Страница: 61 / 78

Option 1 - Code Scanning
1. Keep the remote control aimed at the IR input (or
“eye”) for the component you want to control.
For example, if you want to program the remote
control to operate the TV, keep the remote aimed
at the TV’s IR input (many in-vehicle TVs come
with an IR eye built into the screen).
2. Press and hold the remote control’s component
button (for example, TV).
3. At the same time, press the MUTE button for two
seconds.
4. Release both buttons.
The component button should light and remain
lit. If it doesn’t remain lit, repeat Steps 1 through
4 above.
5. Repeatedly press the upper part of the
CHANNEL (CH) button.
6. Continue pressing the CHANNEL (CH) button to
step through the codes until the component turns
off, indicating that you have found the correct
device code.
If you accidentally pass a code that
responds or realize you may not have been aiming the
remote control at the component, repeatedly press the
lower part of the CHANNEL (CH) button to step
backward through the codes.
7. Press the remote control’s PWR button to verify
that you have found the proper code.
The correct
code will turn the component on and off.
8. Press the component button again to lock in the
code (in this example, the TV button).
54-0208-01
4.10
TracVision A5 Installation Guide
CH
P
A
G
E