Connecting a VCR
(Optional)
To connect a VCR to the vehicle’s TracVision-
equipped entertainment system, follow the steps
below.
1.
Connect the VCR to the TracVision A5 receiver:
If the VCR has RCA-type A/V connectors:
a.
Connect the supplied audio/video cables to
the lower “Audio R,” “Audio L,” and
“Video” jacks on the receiver’s rear panel.
b. Connect the other ends of the audio/video
cables to the
VCR’s audio
and video inputs.
If
the VCR has only one audio input jack, connect
the audio cable that is connected to the receiver’s
“Audio L” jack.
If the VCR only has an RF (coaxial) connector:
a.
Connect an RF cable
(not supplied)
to the
“Out to TV Tuner” jack on the receiver’s rear
panel.
b. Connect the other end of the RF cable to
the VCR’s VHF/UHF or RF input.
2.
Connect the VCR to the vehicle’s
entertainment
system
:
If the
entertainment system
and VCR have RCA-
type A/V connectors:
Connect a set of audio/video cables from the
VCR’s audio and video output jacks to the
entertainment system
’s audio and video inputs.
If the
entertainment system
or VCR only has an
RF (coaxial) connector:
Connect an RF cable from the VCR’s VHF/UHF
or RF output jack to the
entertainment system
’s
VHF/UHF or RF input.
Connecting a VHF Antenna
(Optional)
If you need to connect an existing VHF antenna to the
vehicle’s TracVision-equipped entertainment system,
simply connect the cable to the receiver’s “VHF
Antenna In” jack.
54-0208-01
Installing the Receiver
3.11
Содержание A5
Страница 1: ...TracVision A5 Installation Guide ...
