Operators Manual - Pentruder Modular Drilling system
21
Hydraulic power pack Pentpak 15 / Pentpak 25
Fig. 13. Remote control
Remote control
The Pentpak power pack is conveniently controlled by means of a hand held remote control
unit where all functions are gathered. When using the hydraulic feed unit the feeding
movement is also controlled with the help of the remote control.
This solution enhances safety as the operator can have a full and unrestricted overview and
control of the machine.
The remote control unit is connected to the Pentpak 15 or 25 power pack with a multi-pin
connector. All functions are reset as soon as at least one of the phases of the power supply is
disconnected, or as soon as at least one of the emergencies stops buttons are depressed. No
functions remain and the power pack must be restarted after a stop is caused by any of the
above-mentioned reasons.
Emergeny STOP
buttom
Start/Stop
power pack
No function
for the drill
system
Start/Stop for operation of
the drill unit. Press, hold and
hit the El.Motor switch once
to start the drill bit rotation,.
Feed movement on
the column
Potentiometer for
feeding speed
