9
21
20
D
B
A
4.3. Maximum capacity permitted
The maximum capacity permitted is that of a single
operator, i.e. 120 kg.
Make sure that the maximum
working load at the point of
suspension is 120 kg + 30 kg
(weight of seat + fall arrest device),
i.e. 150 kg.
4.4. Operation of SCAFOR™
The operator must first position himself over the seat
and fasten the safety belt.
To move up:
Rotate the right-hand handle (21) in the UP
1.
direction (i.e. in the direction of the arrow) to lift the
seat to the correct height to allow the operator to
sit in it.
Sit in the seat and fasten the safety belt ensuring
2.
that it is integral with the frame.
Move the right-hand handle (21) down (A).
3.
Rotate the left-hand handle (20) in the UP direction
4.
to the vertical (B) where it should automatically
lock.
Operate both handles at the same time, in the
5.
same direction and symmetrically.
The left-hand handle (20) automatically unlocks as
6.
soon as it is released.
Restart the procedure described above to move up
7.
again.
To move down:
Let go of the left-hand handle (20); it will fall freely
1.
to the bottom position and must remain there. This
handle must not be used when moving down.
With the left hand, open the jaws with the yellow
2.
lever (D) on the SCAFOR
TM
housing. If the lever is
difficult to operate, start an upward move with the
right-hand handle and push the yellow lever at the
same time.
Keep the yellow lever in position and rotate the
3.
right-hand handle (21) in the DOWN direction (i.e.
in the opposite direction to UP).
On completion of the work, lower the seat until your
4.
feet touch the ground, unfasten the belt and get off.
Danger
Operation of SCAFOR™
Fig. 9 -
Warning
- MC1452-SUBITO_6FR-EN-D-IT-ES-NL 0
7
/201
8
