ARTIO WB227 Wheel Barrow
Page 10
WB227 Wheel Barrow
7.4 Tipping the Wheel Barrow
Stop the two wheeled tractor on a firm flat
surface, switch the engine off and apply the
brake.
If your two wheeled tractor does not have a
brake select 1st gear and ensure the engine is
switched off.
Pull the release latch located on the cross
section fully towards the machine (Fig. 10), now
twist the release latch 90 degrees clockwise or
anticlockwise to lock it into its retracted position
(Figs. 11 & 12).
Taking care now manually tip the Wheel Barrow
body forwards.
Reverse this procedure to place the Wheel
Barrow body back into its locked, down position
(Fig. 13).
Fig. 12
Fig. 13
Fig. 10
Fig. 11
