ARTIO WB227 Wheel Barrow
Page 6
WB227 Wheel Barrow
4.3
Assembly Instructions
1. Remove the cross section from its transport
position.
2. Using a 13mm spanner remove one bolt from
the frame connector and place to one side, then
remove the frame connector and place to one
side. (Figs. 1 & 2)
3. Locate the cross section into its working position.
(Fig. 3)
4. Reinstall the frame connector removed in step
three, ensure it passes through the cross section
and base supports correctly (Fig. 4) and fully
tighten.
5. Remove any straps or cable ties securing the
Wheel Barrow to its pallet.
6. Locate and remove any cable ties or straps that
secure the Wheel Barrow to the pallet.
7. Push the machine forward safely and gently off
the pallet.
Fig. 3
Fig. 4
Fig. 1
Fig. 2
