ME500-X
Trackunit ME500-X, Technical Manual v.1.1, January
2016
Page 6
Like all wireless devices, the ME500-X may encounter electrical interference that may
affect its performance.
Avoid Body Contact with Device during Operation
Do not operate the ME500-X in direct contact with your body. Maintain at least 2 inches
(20 cm) separation between the device and any parts of your body.
Qualified Service
Except for batteries and Subscriber Identification Module (SIM) card, the ME500-X
contains no user serviceable or replaceable parts. Non-functioning units must be returned
to an authorized service center for repair or replacement.
Accessories and Batteries
Use only approved accessories or batteries. Do not connect incompatible products.
There is risk of explosion or fire if an incorrect type replacement battery contacts are
shorted. Do not exceed the temperature ranges or other environmental conditions
specified by the battery manufacturer. Dispose of used batteries according to the
instructions provided with the batteries.
Water-Resistance
The ME500-X series is water-resistant according to the IP-67 standard. It is however
recommended that it is be used where it is relatively dry and not subjected to either water
streams or submersion.
Detailed Safety Information
Exposure to Radio Frequency Signals
The ME500-X unit is a low power radio transmitter and receiver. Periodically the ME500-X
wakes up either due to activity or by a timer. When it is ON, it receives and also sends out
radio frequency (RF) signals for a short period of time.
The ME500-X unit cannot be turned off after
installation; however the unit is mostly asleep waiting
for either the wake-up timer or activity on the
acceleration sensor.
The unit operation can continue for approximately 3 to
4 days depending on the charging state of the backup
battery.
