ME500-X
1-9
Trackunit ME500-X, Technical Manual v.1.1, January 2016
Page 22
NOTICE statements according to CFR 47 Part 15.21:
Changes or modifications made to this equipment not expressly approved by Trackunit
may void the FCC authorization to operate this equipment.
Statements according to CFR 47 Part 2.1091 / 2.1093 and OET bulletin 65 / RSS-102:
With respect to radiofrequency radiation exposure Information it is declared that this
equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with minimum distance of 20 cm
between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Déclarations selon le CFR 47 Sections 2.1091 / 2.1093 et bulletin OET 65 / RSS-102 :
Respectant les informations relatives à l'exposition aux radiations de fréquences radio, on
déclare que cet équipement respecte les limites d'exposition aux radiations de la FCC aux
conditions prévues pour un environnement non contrôlé.
Cet équipement doit être installé et fonctionner à une distance minimale de 20 cm
entre l'appareil irradiant et votre corps.
Cet émetteur ne doit pas être installé ou utilisé en conjonction avec d'autres
antennes ou d'autres émetteurs.
EEC/ International
•
The ME500-X product complies with the essential requirements of the Automotive
Directive 2004/104/EEC - UN regulative ECE R10 EMC rev. 4
•
The ME500-X product complies with the essential requirements of the Directive
2003/37/EEC and Directive 2006/42/EEC
•
The ME500-X product complies with the essential requirements of the R&TTE
directive 1999/05/EEC directive with respect to the EMC requirements, safety and
radio spectrum matters.
•
The ME500-X product complies with the essential and environmental requirements
of the Interoperability of trans-European conventional rail system 2001/16/EC and
2004/50/EC directives, when used as intended on rolling stock.
•
The ME500-X complies with the essential requirements of the 2011/65/EC directive
on the restriction of the use of certain hazardous substances in electrical and
electronic equipment.
Including:
ISO 13309:2010
Construction machinery
ISO 13766:2006
Earth-moving machinery
EN/ISO 14982:2010
Agricultural and forestry machines
EN/IEC 60950-1:2013 +
A11, A1,A2 and A12
ITE Safety
EN/ISO 50121-3-2:2006
EMC for apparatus on rolling stock
