Hygiene Equipment
Designed for People
41
Service instructions TR Comfortline
Air Spa - How to replace the Vento Blower
The Vento blower is located behind the service hatch at the tap end.
The Vento blower is no longer available, but it is possible to install the Esprit 500 blower instead. See page 14
for parts needed.
-
Disconnect the blower from
the circuit board in the
enclosure underneath the
tub.
-
Unscrew the blower bracket
from the tub frame (4
screws).
-
Fasten the bracket dampers
to the nuts in the tub frame.
-
Assemble the Esprit 500
blower on the blower
bracket.
-
Assemble blower and
bracket to the dampers and
fasten it.
-
Connect the blower to the
circuit board.
If the blower doesn’t start, connect a pneumatic starter and press it to start the blower to activate the
pneumatic switch inside the blower.
Pneumatic starter
Vento blower
