TPS WP-84 Скачать руководство пользователя страница 8

Страница: 8 / 42

Page 8

General Specifications

Temperature Compensation : Automatic, 0 to 100

Cond. Sensor Span Range : k=0.1 Sensor : k=0.075 to k=0.133

k=1.0 Sensor : k=0.75 to k=1.33
k=10 Sensor : k=7.5 to k=13.3

Temp. Sensor Offset Range : -10.0

C to +10.0

Auto Standard Recognition : Cond.

: 150

S/cm, 1413

S/cm, 2.76 mS/cm,

12.88 mS/cm, 58.0 mS/cm

Salinity : 69.5 ppM, 2.00 ppK, 8.00 ppK, 36.0 ppK

Memory

: 150 readings including date and time.

Automatic Logging

: User-set for one reading every 1 to 90 seconds, 1 to

90 minutes, or 1 to 24 hours.

RS232 Output (optional)

: 300, 1200 & 9600 baud.

8 bits, no parity, 1 stop bit, XON/XOFF Protocol.

Clock

: Calendar clock displays date, month, hours, minutes

& seconds.
Year is recorded in memory and transmitted to the
optional RS232 port, but is not displayed.

Battery Saver

: On : Auto switch-off after 5 minutes.

Off : Continuous use.
Bar Graph display of battery charge level.
Readout of battery voltage available for
troubleshooting.

Good Laboratory Practices : Date, Time and Value of last Conductivity, Salinity

and Temperature calibration are stored, and can be
recalled or sent to the optional RS232 port at any
time.

Power

: 6V NiCad Rechargeable Battery for approximately

40 hours operation.

Dimensions

: 187 x 110 x 51 mm

Mass

: Instrument only

: Approx 440g

Full Kit

: Approx 1.7kg

Environment

Temperature

: 0 to 45

Humidity

: 0 to 90 % R.H.

Содержание WP-84











































Результаты поиска

Содержание WP-84

Отзывы:

TPS WP-84, Руководство пользователя, Страница: 8 / 42

Результаты поиска

Содержание WP-84

Отзывы: