TPS WP-84 Скачать руководство пользователя страница 5

Страница: 5 / 42

Page 5

Press to record readings into memory. See section 8.1.

Press to show or hide the date and time. See section 12.2.

Also used to select k=0.1 or k=10 sensor, when the standard k=1 sensor is not
being used.

Press to start or stop automatic logging. See section 9.

Alternatively, press to transmit current reading plus date and time to the RS232
port (optional). See section 10.2.

Only used within the menu system on the

WP-84

Press to access the user-friendly menu system which makes the

WP-84

a breeze to

operate.

and

The

and

keys are used when calibrating temperature readout (section 5),

setting the clock (section 12.1), setting the automatic logging period (section 9),
and displaying GLP information (section 7.1).

The

key is also used to initialise the

WP-84

at turn-on. See section 14.

Switches the

WP-84

on and off.

Display

32 character alpha-numeric display with user-friendly menu and prompting
system. Shows Conductivity/Salinity and Temperature simultaneously. Date and
time can also be displayed.

Содержание WP-84











































Результаты поиска

Содержание WP-84

Отзывы:

TPS WP-84, Руководство пользователя, Страница: 5 / 42

Результаты поиска

Содержание WP-84

Отзывы: