49
Chapter 4
Configure the Router
•
Egress Bandwidth
- This field displays the max and min upload bandwidth through the
WAN port. The default is 0.
•
Ingress Bandwidth
- This field displays the max and min download bandwidth through
the WAN port. The default is 0.
•
Status
- This field displays the status of the rule.
•
Modify
- Click
Modify/Delete
to edit/delete the rule.
¾
To add a Bandwidth control rule:
1. Click
Add New
.
2. Enter the information as the figure shown below.
3. Click
Save
.
4 12 IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
a network device’s IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with a matching IP address in
the ARP list, but with an unrecognized MAC address.
4 12 1 Binding Settings
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the
router.
2. Go to
IP & MAC Binding
>
Binding Settings
.
3. Select
Enable
for ARP Binding.
4. Click
Save
.