41
Chapter 4
Configure the Router
•
UDP-FLOOD Packets Threshold (5~3600)
- The default value is 500. Enter a value
between 5 ~ 3600. When the number of the current UPD-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
•
Enable TCP-SYN-FLOOD Attack Filtering
-Check the box to enable or disable this
function.
•
TCP-SYN-FLOOD Packets Threshold (5~3600)
- The default value is 50. Enter a value
between 5 ~ 3600. When the number of the current TCP-SYN-FLOOD packets is
beyond the set value, the router will startup the blocking function immediately.
•
Forbid Ping Packet From WAN Port
- Enable or Disable Forbid Ping Packet From WAN
Port. The default setting is enabled. The ping packet from WAN cannot access the
Router. (Defends against some viruses).
•
Forbid Ping Packet From LAN Port
- The default setting is disabled. If enabled, the
ping packet from LAN cannot access the router. This function can be used to defend
against some viruses.
3. Click
Save
.
4. Click
Blocked DoS Host List
to display the DoS host table by blocking.
4 7 3 Local Management
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the
router.
2. Go to
Security
>
Local Management
, and you can block computers in LAN from
accessing the router.
For example
, if you want to allow PCs with specific MAC addresses to access the router’s
web management page locally from inside the network, please follow the instructions
below:
1 ) Select
Only the PCs listed can browse the built-in web pages to perform
Administrator tasks
.
2 ) Enter the MAC address of each PC separately. The format of the MAC address
is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with the listed
