TL-WR941N/TL-WR941ND
Wireless N Router
)
Note:
After a device is successfully added to the network by QSS function, the QSS LED will keep on for
about 5 minutes and then turn off.
1.4.2 The Rear Panel
Figure 1-2 Rear Panel sketch
The following parts are located on the rear panel (View from left to right).
¾
POWER:
The Power socket is where you will connect the power adapter. Please use the
power adapter provided with this TL-WR941N/941ND Wireless N Router.
¾
RESET:
There are two ways to reset to the Router's factory defaults:
1) Use
the
Factory Defaults
function on
System Tools
->
Factory Defaults
page in the
Router's Web-based Utility.
2) Use the Factory Default Reset button: Press the Reset button for five seconds and then
wait for the Router to reboot.
¾
WAN:
This WAN port is where you will connect the DSL/cable Modem, or Ethernet
¾
1,2,3,4 (LAN):
These ports (1, 2, 3, 4) connect the Router to the local PC(s)
¾
Wireless antenna:
To receive and transmit the wireless data.
-5-
