70
TL-WR941HP
450Mbps High Power Wireless N Router
5. Select a schedule from the
Schedule
drop-
down list or choose “
Click Here To Add New
Schedule
”.
6. In the
Status
field, select
Enabled
or
Disabled
to enable or disable your entry.
7. Click the
Save
button.
Figure 3-53 Add Internet Access Control Entry
For example
: If you desire to allow the host with MAC address 00-11-22-33-44-AA to access
www.tp-link.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in
the LAN to access the Internet, you should follow the settings below:
1. Click the menu
Access Control
on the left. Select
Enable Internet Access Control
and
choose "
Allow the packets specified by any enabled access control policy to pass
through the router
".
2. Click
Setup Wizard
button.
3. Add a new host with the Host Description is Host_1 and MAC Address is
00-11-22-33-44-AA, and click
Next
.
4. Add a new target with the Target Description is Target_1 and Domain Name is
www.tp-link.com, and click
Next
.
5. Add a new schedule with the Schedule Description is Schedule_1, Day is Sat and Sun,
Start Time is 1800 and Stop Time is 2000, and click
Next
.
6. Add a new rule with the Rule Description is Rule_1, Host is Host_1, Target is Target_1,
Schedule is Schedule_1, Status is Enabled, and click
Finish
.
Then you will go back to the Access Control Rule Management page and see the following list.
3.4.10.2. Host
Go to
“
Advanced
→
Access Control
→
Host
”, and then you can view and set a Host list in the
screen as shown in Figure 3-54. The host list is necessary for the Access Control Rule.
