81
TL-WR941HP
450Mbps High Power Wireless N Router
2. Enter the MAC Address or IP Address.
3. Click the
Find
button.
Figure 3-70 Find IP & MAC Binding Entry
Click the
Enable All
button to make all entries enabled.
Click the
Delete All
button to delete all entries.
3.4.14 ARP List
Go to
“
Advanced
→
Bandwidth Control
→
ARP List
”, you can see the ARP List, showing all the
existing IP & MAC Binding entries as shown below. To manage the computer, you could
observe the computers in the LAN by checking the relationship of MAC address and IP address
on the ARP list, and you could also configure the items on the ARP list.
Figure 3-71 ARP List
1.
MAC Address
-
The MAC address of the controlled computer in the LAN.
2.
IP Address
-
The assigned IP address of the controlled computer in the LAN.
3.
Status
-
Indicates whether or not the MAC and IP addresses are bound.
4.
Configure
-
Load or delete an item.
Load
-
Load the item to the IP & MAC Binding list.
Delete
-
Delete the item.
Click the
Bind All
button to bind all the current items, available after enable.
Click the
Load All
button to load all items to the IP & MAC Binding list.
Click the
Refresh
button to refresh all items.
Note:
An item could not be loaded to the IP & MAC Binding list if the IP address of the item has been
loaded before. Error warning will prompt as well. Likewise, "Load All" only loads the items without
interference to the IP & MAC Binding list.
