TL-WR842ND
300Mbps Multi-Function Wireless N Router User Guide
- 63 -
4.10 Forwarding
Figure 4-50 The Forwarding menu
There are four submenus under the Forwarding menu (shown in Figure 4-50):
Virtual Servers
,
Port Triggering
,
DMZ
and
UPnP
. Click any of them, and you will be able to configure the
corresponding function.
4.10.1 Virtual Servers
Choose menu “
Forwarding
→
Virtual Servers
”, and then you can view and add virtual servers in
the next screen (shown in Figure 4-51). Virtual servers can be used for setting up public services
on your LAN. A virtual server is defined as a service port, and all requests from Internet to this
service port will be redirected to the computer specified by the server IP. Any PC that was used
for a virtual server must have a static or reserved IP address because its IP address may change
when using the DHCP function.
Figure 4-51
Virtual Servers
¾
Service Port
- The numbers of External Service Ports. You can enter a service port or a
range of service ports (the format is XXX – YYY; XXX is the Start port and YYY is the End
port).
¾
Internal Port
- The Internal Service Port number of the PC running the service application.
You can leave it blank if the
Internal Port
is the same as the
Service Port
, or enter a
specific port number when
Service Port
is a single one.
¾
IP Address
- The IP address of the PC running the service application.
¾
Protocol
- The protocol used for this application, either
TCP
,
UDP
, or
All
(all protocols
