TL-WR842ND
300Mbps Multi-Function Wireless N Router User Guide
- 38 -
or more Wlans. If this checkbox is selected, you will have to set the following parameters as
shown in Figure 4-17. Make sure the following settings are correct.
Figure 4-17
¾
SSID(to be bridged)
- The SSID of the AP your Router is going to connect to as a client.
You can also use the search function to select the SSID to join.
¾
BSSID(to be bridged)
- The BSSID of the AP your Router is going to connect to as a
client. You can also use the search function to select the BSSID to join.
¾
Search
- Click this button, you can search the AP which runs in the current channel.
¾
Key type
- This option should be chosen according to the AP's security configuration. It
is recommended that the security type is the same as your AP's security type
¾
WEP Index
- This option should be chosen if the key type is WEP(ASCII) or
WEP(HEX).It indicates the index of the WEP key.
¾
Auth Type
- This option should be chosen if the key type is WEP(ASCII) or
WEP(HEX).It indicates the authorization type of the Root AP.
¾
Password
- If the AP your Router is going to connect needs password, you need to fill
the password in this blank.
)
Note:
If one of SSID (2~3) is enabled, the
Enable WDS
checkbox will turn gray and cannot be
enabled.
4.6.2
Wireless Security
Choose menu “
Wireless
→
Wireless Security
”, you can configure the security settings of your
wireless network.
There are five wireless security modes supported by the Router: WEP (Wired Equivalent Privacy),
WPA (Wi-Fi Protected Access), WPA2 (Wi-Fi Protected Access 2), WPA-PSK (Pre-Shared Key),
WPA2-PSK (Pre-Shared Key).
