TP-Link JetStream T2600G-28TS Скачать руководство пользователя страница 478

Страница: 478 / 1136

Configuring LLDP

LLDP Configurations

User Guide

449

Included TLVs

Configure the TLVs included in the outgoing LLDP packets.

The switch supports the following TLVs:

PD: Used to advertise the port description defined by the IEEE 802 LAN station.

SC: Used to advertise the supported functions and whether or not these functions

are enabled.

SD: Used to advertise the system’s description including the full name and version

identification of the system’s hardware type, software operating system, and

networking software.

SN: Used to advertise the system name.

SA: Used to advertise the local device’s management address to make it possible

to be managed by SNMP.

PV: Used to advertise the 802.1Q VLAN ID of the port.

VP: Used to advertise the protocol VLAN ID of the port.

VA: Used to advertise the name of the VLAN which the port is in.

LA: Used to advertise whether the link is capable of being aggregated, whether

the link is currently in an aggregation, and the port ID when it is in an aggregation.

PS: Used to advertise the port’s attributes including the duplex and bit-rate

capability of the sending IEEE 802.3 LAN node that is connected to the physical

medium, the current duplex and bit-rate settings of the sending IEEE 802.3 LAN

node and whether these settings are the result of auto-negotiation during link

initiation or of manual set override action.

FS: Used to advertise the maximum frame size capability of the implemented MAC

and PHY.

PW: Used to advertise the port’s PoE (Power over Ethernet) support capabilities.

4) Click

Apply

2.2 Using the CLI

2.2.1 Global Config

Enable the LLDP feature on the switch and configure the LLDP parameters.

Step 1

configure

Enter global configuration mode.

Step 2

lldp

Enable the LLDP feature on the switch.

Содержание JetStream T2600G-28TS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание JetStream T2600G-28TS

Отзывы:

Похожие инструкции для JetStream T2600G-28TS

Бренды по названию

Популярные бренды

TP-Link JetStream T2600G-28TS, Руководство пользователя

Результаты поиска

Содержание JetStream T2600G-28TS

Отзывы:

Похожие инструкции для JetStream T2600G-28TS

Бренды по названию

Популярные бренды