TP-Link C50V5 Скачать руководство пользователя страница 115 | Manualshive

Страница: 115 / 117

background image

110

Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to
only Mobile Configurations. The antennas used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be co-
located or operating in conjunction with any other antenna or transmitter.”
We,

TP-Link USA Corporation

, has determined that the equipment shown as above

has been shown to comply with the applicable technical standards, FCC part 15. There
is no unauthorized change is made in the equipment and the equipment is properly
maintained and operated.

Issue Date: 2018.3.9

FCC compliance information statement

Product Name: I.T.E POWER SUPPLY
Model Number: T120100-2B1
Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: [email protected]
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the

«
...
113
114
115
116
117
»

Содержание C50V5






















































































































Отзывы:

Нет отзывов

Похожие инструкции для C50V5

Бренд: PaloAlto Networks Страницы: 2

Бренд: Patton electronics Страницы: 2

ipRocketLink 3086FR

Бренд: Patton electronics Страницы: 6

Бренд: Patton electronics Страницы: 16

Бренд: Patton electronics Страницы: 51

Бренд: Ruckus Wireless Страницы: 56

Бренд: Schrack Technik Страницы: 2

Бренд: Patton electronics Страницы: 2

Бренд: Lanner Страницы: 78

CyberSWITCH CSX101

Бренд: Cabletron Systems Страницы: 72

Бренд: B+B SmartWorx Страницы: 50

Бренд: Cradlepoint Страницы: 2

Бренд: ADTRAN Страницы: 9

Бренд: Alfa Network Страницы: 11

DotSurfer GPC-2100

Бренд: Gtran Wireless Страницы: 44

Бренд: ActionTec MI424WR Страницы: 3

Бренд: Erbauer Страницы: 36

Бренд: VERTO Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды